WS-C3650-48TD-S Cisco brand 3650 Series 48 Port Data 2x10G Uplink IP Base Network Switch
●Integrated wireless controller capability with:
◦Up to 40G of wireless capacity per switch (48-port models)
◦Support for up to 50 access points and 1000 wireless clients on
each switching entity (switch or stack)
●24 and 48 10/100/1000 data and PoE+ models with energy-efficient
Ethernet (EEE) supported ports
●24 and 48 100-Mbps and 1-, 2.5-, 5-, and 10-Gbps (multigigabit)
Cisco UPOE and PoE+ models with EEE
●Five fixed-uplink models with four Gigabit Ethernet, two 10 Gigabit
Ethernet, four 10 Gigabit Ethernet, eight
10 Gigabit Ethernet, or two 40 Gigabit Ethernet Quad Small
Form-Factor Pluggable Plus (QSFP+) ports
●24-port and 48-port 10/100/1000 PoE+ models with lower noise and
reduced depth of 11.62 inches for shallow
depth cabinets in enterprise, retail, and branch-office
environments
●Optional Cisco StackWise-160 technology that provides scalability
and resiliency with 160 Gbps of stack
throughput
●Dual redundant, modular power supplies and three modular fans
providing redundancy
●Support for external power system RPS 2300 on the 3650 mini SKUs
for power redundancy
●Full IEEE 802.3at (PoE+) with 30W power on all ports in 1 rack unit
(RU) form factor
●Cisco UPOE with 60W power per port in 1 rack unit (RU) form factor
●IEEE 802.3bz (2.5GBASE-T and 5GBASE-T) to go beyond 1 Gbps with
existing Category 5e and Category 6
●IEEE 802.1ba Audio Video Bridging (AVB) built in to provide a
better AV experience, including improved time
synchronization and quality of service (QoS)
●Software support for IPv4 and IPv6 routing, multicast routing,
modular QoS, Flexible NetFlow (FNF) Version 9,
and enhanced security features
●Single universal Cisco IOS® Software image across all license levels, providing an easy
upgrade path for
software features
●Enhanced limited lifetime warranty (E-LLW) with next business day
(NBD) advance hardware replacement
and 90-day access to Cisco Technical Assistance Center (TAC)
support
| Product Code | WS-C3650-48TD-S |
| Enclosure Type | Rack-mountable - 1U |
| Feature Set | LAN base |
| Uplink Interfaces | 2 x 10G SFP+ & 2 x 1G SFP |
| Ports | 48 x 10/100/1000 Ethernet ports |
| Maximum stacking number | 9 |
| Stack bandwidth | 160Gbps |
| Forwarding Performance | 104.16Mpps |
| Switching Capacity | 176Gbps |
| RAM | 4 GB |
| Flash Memory | 2 GB |
| Number of AP per switch/stack | 50 |
| Number of wireless clients per switch/stack | 1000 |
| Dimensions | 44.5 x 44.8 x 4.4 cm |
| Package Weight | 16 Kg |
Power over Ethernet Plus (PoE+)
The Cisco Catalyst 3650 Series Switches support both PoE (IEEE
802.3af) and PoE+ (IEEE 802.3at standard),
which provide up to 30 W of power per port. PoE removes the need
for wall power to each PoE-enabled device
and eliminates the cost for additional electrical cabling and
circuits that would otherwise be necessary in IP phone
and WLAN deployments. The 3650 Series can provide a lower TCO for
deployments that incorporate Cisco IP phones,
Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3at-compliant
end device. Table 5 shows the
power supply combinations required for different PoE needs.
Minimum Power Supply Requirements for Full PoE and PoE+
| 24-Port PoE Switch | 48-Port PoE Switch |
PoE on All Ports
(15.4 W per port) | One PWR-C2-640 WAC | One PWR-C2-1025WAC or Two PWR-C2-640 WAC |
PoE+ on All Ports
(30 W per port) | One PWR-C2-1025WAC or Two PWR-C2-640 WAC | Two PWR-C2-1025 WAC |
